401 USB Flash Module The Model 401 USB Flash Module allows you to easily field update firmware without the use of a computer and...
DMP: How to program 1101 The 1101 Series Wireless Universal Transmitters are two‑way supervisory wireless transmitters typically used for door and window applications. The 1101...
DMP: Version 254 Update Updated Version 254 (9/17/25) firmware is now available for XR Series Control Panels. Panel Serial Number in Serial 3 Messages...
XR – System Components The XR150/XR550 Series diagram below shows some of the accessory modules you can connect for use in various applications. A...
Connecting LX-Bus, AX-Bus and Keypad Bus Devices You can connect devices to the LX-Bus/AX-Bus and Keypad Bus through the PROG, LX500, LX600, LX700, LX800, and LX900 4-pin...
XR550 – Encrypted Communication The XR550 panel can communicate using AES encryption. If you currently have an XR550 panel with network capability, you may...
DMP – LX500-LX900 Bus You can connect the following devices to the LX-Bus™ connections provided on the panel:
Install 714N-POE Network Zone Expander The 714N-POE Network Zone Expander Module allow you to add 4 zones to XR150/XR550 Series panels using IP network capability....
DMP – 1100R Series Wireless Repeater The 1100R Series Wireless Repeater increases the wireless communication range and improves the signal quality between the DMP wireless receiver...
DMP – 716 Output Expansion Module The 716 Output Expansion Module provides four independently programmable Form C (SPDT) relays and four zone‑following annunciator outputs for use...
712-8 Zone Expansion Module The Model 712‑8 Zone Expansion Module allows you to increase the number of protection zones available on a DMP panel....
XR Series – Add Wireless Receiver To add a DMP wireless receiver, connect it to the panel’s XBUS using the provided 4-wire harness, program a house...
DMP – Sensor Reset Sensor Reset resets panic and fire sensors after they have been tripped. They must be reset before they can detect...