Your system may be pre-programmed at installation to support Z-Wave doors. This option allows you to send user codes of user numbers 2-20 to all compatible Z-Wave Doors. Once codes have been received by the lock, a valid user code entered at the lock (by user number 2-20) will lock the door or unlock and disarm the system according to the user’s authorities.
- 1. Access the User Menu.
- 2. Press the COMMAND key until USER CODES? displays.
- 3. Press any select key or area. The keypad displays ADD DEL CHG BAT. Press COMMAND again to display FRGV SEND.
- 4. Select SEND to send user codes of user numbers 2-20 to all compatible Z-Wave Doors on your system. The keypad displays the progress of user codes being sent. The process may take several minutes.
- 5. If all doors receive the user codes, the display returns to the Status List.
- 6. If a lock does not receive the user codes, the keypad displays CODES NOT SENT TO ALL DOORS.