- Press the COMMAND key until ARM DISARM displays. During entry delay this process starts at step 3.
- Select DISARM to disarm areas.
- The keypad displays ENTER CODE: .Enter your user code and press COMMAND. The keypad displays ALL? NO YES.
- Select YES to disarm all areas authorized for your user code.
- Select NO to disarm only certain areas individually. The keypad then displays the name of each area authorized for your user code followed by the NO YES display.
- Select YES to disarm the area displayed.
- Select NO to not disarm the area and display the next area.
- If you are disarming the system out of a normally scheduled time and you have the authority to extend a schedule, the keypad then displays 2HR 4HR 6HR 8HR. Select the number of hours to extend the schedule. Note: If you do not have the authority to extend a schedule, this option does not display.
- After all areas have displayed and schedules extended, any alarms or communication problems that occurred during the armed period display.
- If all areas have been disarmed, the keypad next displays ALL SYSTEM OFF.
