How to enable cellular or IP on vista panel
To program radio (cellular or IP) communication on a Vista 21iP system, you must enable the communicator in the panel’s...
Communication
-
-
LTE-X: Installation and Setup
General Information The LTE-X Series Communicator, herein referred to as the communicator, easily connects to your security system’s control panel... -
HWF2-COM Trouble Detection Information
Telco 1 is used for the Fire Panel to output contact ID messages to the HWF2-COM, and Telco 2 is... -
HWF2: PowerBoost1 Information
LED Indicator STATUS AC (green) AC power available. ACTIVE (green) Cyclical flashing – normal communications.Repetition of 3 flashes – loss... -
Telguard: Automatic Self-test Report
The Telguard automatic self-test signal can be programmed to a daily, weekly or monthly schedule as prescribed by contract. The... -
LTE-L57V/A: Installation Guide
General Information The LTE-L57V / LTE-L57A / LTE-L57C Cellular Communication Modules allow the LYNX Touch L5210 and L7000 controls to... -
HW2F: Programming for UL864 Compliance
The HWF2-COM Commercial Fire Alarm Communicator provides a programmable supervision feature that allows the system to meet the UL864 Commercial... -
Telguard Check Status Capability
Although the communicator has the capability for an automatic periodic self-test, a separate feature is provided for determining the current... -
Telguard Automatic Self-test Report
The automatic self-test signal schedule is programmable as prescribed when the communicator is registered. The Central Station receives the automatic... -
TG-7: Complete Power Supervision
The communicator can supervise and report status of the backup battery and AC power source when powered from the AC...