To test the cell connection on your Qolsys IQ Panel, you can run a cellular test from the system’s test menu or check the current signal strength in the “About” menu. The panel needs to be activated with a monitoring service for the test to function properly.
Running a Cellular Test
The cellular test checks the panel’s ability to connect to the cellular network and communicate with the monitoring station’s service (like Alarm.com).
- Swipe down from the top of the home screen on the panel to access the settings tray.
- Tap on Settings, then Advanced Settings.
- Enter your Installer Code (default is 1111) or Master Code (default 1234).
- Tap on System Tests, then select Cellular Test.
- Tap Start to initiate the test. The results, including signal strength and connection status, will be displayed on the screen when finished.
Checking Signal Strength
You can quickly check the panel’s current cellular signal strength as a general indicator of connectivity. A minimum of 2 bars of sustained signal is recommended for reliable operation.
- Swipe down from the top of the home screen to access the settings tray.
- Tap on Settings, then Advanced Settings.
- Enter your Master, Installer, or Dealer Code.
- Tap on About.
- Find and touch the Cellular option to view the signal strength, which is typically shown in both bars (X/5 bars) and a negative decibel (dBm) level. The closer the dBm number is to 0, the stronger the signal.