ACTIVATE THE CELLULAR MODULE
Dealer Admin Activation
- Navigate to the Dealer Admin site (dealer.securecomwireless.com).
- Go to Customers and select the customer name.
- In Systems, select the Add icon.
- Enter the system name.
- In System Type, select CellComSL.
- In Connection Type, select Cellular or EASYconnect + Cell Backup.
- In SIM Number, enter the SIM number and select Get Status.
Note: To activate DualSIM, select the checkbox next to Use DualSIM. Enter the two requested SIM numbers and select Get Status.
- Select Activate.
- In Account Number, enter the system’s receiver number followed by the account number.
- Select a Rate Plan for the communicator.
- Enter the panel Serial Number.
- To confirm proper communication, select Test Connection.
- A dialog box displays to ask if you want to perform the initial connection to the panel. Select Yes.
- Configure additional options as needed, then press Save at the top of the page.
Remote Link Activation
- 1. Go to File > Panel Information.
- 2. Press New.
- 3. In Model, select CellCom.
- 4. If necessary, enter a firmware version number in Version.
- 5. Enter the receiver number and account number, then press OK.
- 6. In Connection Information, select Cellular.
- 7. Enter the panel Remote Key.
- 8. Enter the cellular Phone Number.
- 9. Press OK.
- 10. Go to Program > Communications.
- 11. In Connection, press Activate.
- 12. Select SIM as the SIM Type.
- 13. Enter the SIM number, then select a Rate Plan.
- 14. Press Activate.