Overview: The 5817CBXT is a universal contact-monitoring transmitter designed for use with both household and commercial fire and burglary-initiating devices. It sends an RF signal to a control panel upon activation, alerting a central station of a burglary or fire alarm.
Features and Benefits:
- Three unique input loops (zones) with the first loop being supervised for high-priority alarms.
- Built-in normally closed reed switch and an additional normally closed burglary loop.
- Fourth loop with tamper switches for protection.
- UL Listed for residential and commercial fire and burglary.
Mounting Instructions:
- Remove the transmitter cover using a small screwdriver.
- Disengage the mounting plate and slide it downward.
- For concealed wiring, feed wires through the entry hole on the plate.
- Install the mounting plate using the supplied screws, ensuring proper operation of the back tamper.
- Set the DIP switch for desired primary loop characteristics after enrolling the transmitter’s input IDs.
Technical Specifications:
- Dimensions: 1-9/16″ W x 3-1/2″ H x 1-3/16″ D (40mm x 89mm x 30mm).
- Battery: 3V CR123 Lithium.
- UL Listings: Commercial Fire UL 864, Household Fire UL 985, Household Burg UL 1023, Commercial Burg UL 365, UL 609, UL 1076, UL 1610.
Wiring Connections:
- Connect loop wiring to the unit’s terminals before installing the battery.
- Primary loop 1 requires an end-of-line resistor and should not exceed 20 feet from the transmitter.
- Loop 3 contact device should not be more than 3 feet from the transmitter for UL installations.
Ordering Information: The 5817CBXT Wireless Commercial Transmitter is available for order. Ensure the DIP switch is set to OFF for control panel enrollment.