Generic Alarm Panel Programming
- Set up an account in the AlulaConnect portal.
- Disarm the system (all partitions).
- Enter panel programming mode using the installer code and program the following:
1. Enter a Telephone Number into the Central Station Phone Number field
2. Enter Customer Account Number
3. Enter Reporting Codes
4. Program panel to transmit events in Contact ID format
- Exit programming mode and power down the system.
- Connect the system and the BAT-Connect as shown in the wiring diagram below.
- Power up the system.
- Verify proper operation and reporting of all event codes using your control panel’s installation manual.
Any control panel can be supported for event reporting as long as it provides Tip & Ring connection and transmits events in Contact ID format.
Tip & Ring should not be wired to BAT-Connect using the same multi-conductor cable as the panel wiring. Tip & Ring should be in a separate cable.