How to program PG9933
To program a PG9933 on a Qolsys panel, you must first put the panel in “Auto-Learn Sensor” mode, then install...
DSC
PG9911: Installation Instructions
The PGx911 is a fully supervised, 2-way wireless outdoor siren, designed for installation in areas in which wiring action is...Neo: How to program 9914
To add a PG9914 to a DSC PowerSeries NEO system, enter programming mode, select wireless programming, and then auto-enroll the...PowerSeries Neo: Programming Directory
This section provides a list of all available programming options in numerical order. To program, access Installer Programming mode by...PGx979 Wireless Heat Detector Installation Guide
PGPx979 is a wireless heat detector with a fixed temperature, a rate of rise heat sensor, and an internal piezoelectric...PC5010 – Function Key Options
The following is a list of Function Key options available: [00] – Null KeyThe key is not used and will...PC5010 – Quick Arm / Quick Exit
Quick Arm If the Quick Arm Enable option is enabled the panel can be armed by entering [✱][0]. This is...PC5010 – User Functions (*+6)
This keypad command can be used to program several different functions. The following are the items programmable: [1] – Time...DSC (PC5010) – Door Chime On/Off
If enabled the keypad will beep 5 times rapidly when a zone is tripped and restored. The panel will only...DSC (PC5010) – Zone Bypass
Auto Bypass When the system is armed and any zone or zone(s) on the system have been programmed as Stay/Away...DSC (PC5010) – Arming / Disarming
The system cannot be armed unless the ‘Ready’ light is on. If the ‘Ready’ light is not on make sure...DSC (PC5010) – Partition Master Codes
By default the Partition Master Codes are not programmed. They must be programmed by the System Master Code. A Partition...DSC (PC5010) – System Master Code
The System Master Code can be used to lock in the code. This will prevent the userfrom being able to...