Unplug the Alarm.com Smart Chime and move it to a non-switched electrical outlet between your home router and your Alarm.com Wi-Fi devices. Wait for the Power LED to change from blinking to solid.
If the Router LED begins blinking, wait for the LED to change from blinking to solid.
If the Router LED does not begin blinking, your Alarm.com Smart Chime is too far from your home router. Identify a non-switched electrical outlet closer to your home router and return to step 1.
Once the Router LED is solid, you can assess the strength of the signal being received on the Alarm.com Smart Chime’s Wireless Network Settings Page.
Wi-Fi Protected Setup (WPS) mode
- Be sure to add the Alarm.com Smart Chime to an Alarm.com account before using WPS mode to add video cameras or other Wi-Fi devices to the Wi-Fi network.
- To enter WPS mode, press and release the WPS button on the Smart Chime.
- The WPS LED will rapidly flash to indicate that the device is in WPS mode.
- Press the WPS button on the device you want to add to the Smart Chime’s Wi-Fi network.
- The Devices LED will flash three times and will become solid upon a successful pairing.