Lynx: How to add Z-Wave device
To add a Z-Wave device to a Honeywell LYNX Touch panel, you must place the panel into “inclusion mode” and...
- Home
- 500
-
-
XR 500 – Keypad Bus
DescriptionXR500 Series panel terminals 7, 8, 9, and 10 are for the keypad bus. You can connect up to sixteen... -
XR 500 – Terminals 5 and 6 (Bell Output)
Terminal 5 supplies positive 12 Vdc to power alarm bells or horns. This output can be steady, pulsed, or temporal... -
XR 500 – Standby Battery Selection
To choose the type and number of batteries needed for 24, 60, or 72 hours of standby power based on... -
XR 500 – Dual Style D Zone Module Installation
-
XR 500 – Encrypted Communication
An XR500E panel communicates using AES encryption. If you currently have an XR500N panel installed, you may contact DMP Customer... -
XR 500 – Central Station Communication
You can program the XR500 Series panel for reporting to DMP SCS-1R or SCS-VR Receivers using digital dialer, cellular, network,... -
XR 500 – Output Expansion
In addition to the two SPDT relays and four programmable open collector outputs on the XR500 Series, you can also... -
XR 500 – Zone Expansion
Up to 574 additional zones are available on the XR500 Series using DMP LCD keypad remote zone capability and zone... -
XR 500 – Description
The DMP XR500 Series panel is a versatile 12 Vdc, combined access control, burglary, and fire communicator panel with battery...