Qolsys

The latest firmware version for the Qolsys IQ Panel 4 is 4.6.1, released around June 2025. This update includes several new...

To program a PG9933 on a Qolsys panel, you must first put the panel in “Auto-Learn Sensor” mode, then install...

To program a PG9920 repeater on a Qolsys panel, first put the panel into “Auto-Learn Sensor” mode by going to...

To program a DSC PG9938 panic switch on a Qolsys panel, enter Installer Code in Settings > Advanced Settings >...

AP mode To ensure the device will have a sufficient Wi-Fi signal. WPS mode

Note: This method will also enroll the device to the customer’s account as part of the process. To connect devices...

To program a PG9914 on an IQ Panel 4, navigate to Settings > Advanced Settings and enter the installer code....

To program a PG9929 key fob on an IQ Panel 4, first put the panel in “Auto-Learn Sensor” mode through...

To connect a PowerG IQ Remote to an IQ Panel, you can use either Wi-Fi or PowerG. For PowerG, enable auto-learn on...

To factory reset a Qolsys IQ Panel 4, go to Settings, Advanced Settings, enter the Dealer Code (default 2222), then navigate...

FlexTilt camera adjustment allows the built-in Panel Camera to be angled up or down depending on the installation need. This...

Note: For UL/ULC Commercial Burg installations (UL2610/ULC-S304 Security Level II compliant) use only wall mount option. IMPORTANT IF USING CUSTOM...

To clean the Qolsys IQ Panel 4 screen, first activate the “Clean Screen” mode by swiping down from the top...

To connect your Qolsys IQ4 Panel to Wi-Fi, swipe down from the time display to open the drop-down menu, tap...

To “reset” a Qolsys IQ4 panel, you can perform a hard reboot by pressing and holding the power button on...