SD-2000: User Deletion
Removal of users from the panel can be performed as follows: CODE – USER – USER NUMBER – # [User...
Legacy Systems
SD-2000: User Programming
Users can be programmed through the keypad in addition to the external programming devices. Keypad programming allows authorized users to...SD-2000: Users
Unlike zones and keypads, each of the 128 users can be assigned to multiple partitions (programming question#026). Also, users can...FBII XL2 – Zone Bypass
The Bypass function excludes a zone of protection from the security system until it is unbypassed (either by using the...Legend 100 – Zone Baypass
Bypasses are performed to eliminate burglary zones that are not ready or faulty from activating the security system. BYPASS PROCEDURE...Legend 100 – Relay #1
Relay 1 can be used a bell output or as dry contact as shown bellow:Napco Gemini – Keypad Messages
The GEM-RP1CA/RP1CAe/RP1CAe2 Keypad can display the following messages. The GEM-RP2AS/RP2ASe/RP2ASe2 will display similar abbreviated messages that may scroll through two...Napco Gemini – User Codes
The first code programmed should replace the default (Level-3) code, “U01 123 • • • – • • – •...Napco Gemini – Change master code
To change a user code on a Napco panel, you generally need the master code and access to the keypad. Enter...