Users can be programmed through the keypad in addition to the external programming devices. Keypad programming allows authorized users to change user access codes and authorization levels.
Note: The initial user authorization levels and partition assignments are initially setup through the EZ-Mate PC Downloader, LCD Keypad programming, or obtained through the default values.
Users within the SD-2000 control panel have the following characteristics:
USER NUMBER
The system accommodates up to 128 different user codes. The user number determines which user is being defined or modified with numbers
USER ID
Actual four digit code (0000 – 9999) entered at the keypad to perform the keypad operations. This value is displayed throughout this chapter as [USER]. USER ID’s – cannot be duplicated within the same panel.
AUTHORIZATION LEVEL
Each user of the system is assigned an authorization level which determines access to various system functions as described below:
NOTE: Multiple users can be assigned the same authorization level and perform the identical functions.
USER PROGRAMMING PROCEDURE LCD KEYPAD
