Radionics: D168 Module Installation
The D168 is a remote control module connecting to the telephone line in parallel with all other devices, including the...
Legacy Systems
-
-
S2000 – How to enter programming
LCD Keypad programming can be entered as follows: [CODE] [*] [INSTALLER CODE] [1] Where During keypad programming the function key... -
Napco GEM-P1632: Error codes
Napco GEM-P1632 trouble codes appear on the keypad as “E” error messages accompanied by numbers. Key codes include E01-00 (AC... -
Program DSC PC5010 to use Contact ID
To program your DSC PC5010 (Power832) to use Contact ID, you need to set the monitoring phone number, account number,... -
GEMC-EZM8 – Installation Instructions
The capacity of the GEMC-Series control panels may be expanded through the use of a GEMC-EZM8 Zone Expan- sion Module.... -
Legend 100: System operation
AC INDICATOR This light indicates that AC power is connected to the Security System. Battery backup exists to operate the... -
Legend 100: Keypad emergency conditions
In addition to individual zone alarms various conditions can be transmitted directly through the keypad. These conditions are initiated through... -
NX-148E: Changing user code
-
NX-148E: Understanding the lights
Armed Light: The armed light is “on” when the system is armed. The armed light is “off” when it is... -
NX-148E: Glossary of terms
Abort Delay: An option that allows a delay in reporting to the central station. Authority Level: The level of access an individual...