Submit Article
Contact Us
About Us

Home
Legacy Systems
Legend 100 – Relay #1

Search For

Other Articles

DMP XF6: Accessory devices
Reset Alula radio/communicator
How to add a zone to a VISTA H3
DMP XF6: Programming requirements
DMP XF6: Compatibility
DMP XF6: Wire the panel
DMP XF6: Install the panel
DMP XF6: Specifications Summary
XF6: Operating Instructions
Radionics: D168 Module Installation
PROA7PLUS: Re-register the radio
Install piezo on Honeywell Vista 21
S2000 – How to enter programming
DMP: Version 263 Update
Qolsys IQ4: Latest firmware version
Napco GEM-P1632: Error codes
Honeywell VISTA-128BPT compatible devices
Honeywell Vista 128BPT: ECP Error
Updating firmware on an Alula cellular communicator
How to update NAPCO StarLink firmware
How to adjust thermostat from IQ Panel 5
Create a guest code on the Qolsys IQ5
Programming VISTA-21iP for internet-only
Program user code on DMP XR/XT panel
Program the on-board triggers on Vista 21

Legend 100 – Relay #1

Relay 1 can be used a bell output or as dry contact as shown bellow:

Tagged: 100 legend relay

Was this article helpful?

© Copyright 2026 - AlarmDocs.Com