The keypad programming questions can be obtained either sequentially or directly as follows:
NOTE: In order to use either question selection method you must already be in the Installer Keypad Programming mode.
SEQUENTIAL METHOD
A fast method to scroll through the sequence of programming questions involves the successive use of the NEXT QUESTION (or STAY ) key. This will advance forward through the programming questions in sequential order without changing any of the current values. The questions presented will depend on the Installer Programming level and the values in previous questions.
FORMAT: NEXT Q. NEXT Q. NEXT Q
DIRECT METHOD
Using the direct method any specific programming question can be obtained through the question sequence number. This method provides instant access to any programming question through the three digit sequence number.
FORMAT: SHIFT NEXT QUESTION NNN
- SHIFT NEXT QUESTION is the depression of the SHIFT [*] key followed by NEXT QUESTION [STAY] function key.
- NNN is the three digit sequence number of the question desired.
NOTE: The system must already be in the Programming mode.
After depressing the SHIFT key followed by the NEXT QUESTION key the following display will appear:
EXAMPLE: SHIFT NEXT QUESTION 003
Press the NEXT QUESTION key followed by 0 0 3. This will obtain question number 03 as follows:
In this particular example, the primary Central Station telephone number question was obtained. At this point, the contents of this field can be modified or another question can be obtained. If the question requested belongs to an area that contains multiple offsets then the direct access method will first obtain the selection display for that group. Specifically, this applies to the following groups:
For example, if requesting the Zone CS Code question, the Zone selection question will first appear. After entry of the desired zone, the first question will appear for that zone.