DMP: Enable cellular or wireless communication
Enabling radio (cellular or wireless) communication on a DMP panel involves physical installation of a cellular communicator/receiver and programming via...
- Home
- communication
-
-
How to enable cellular or IP on vista panel
To program radio (cellular or IP) communication on a Vista 21iP system, you must enable the communicator in the panel’s... -
LTE-L57V/A: Installation Guide
General Information The LTE-L57V / LTE-L57A / LTE-L57C Cellular Communication Modules allow the LYNX Touch L5210 and L7000 controls to... -
TG-7: Link Supervision
In order to satisfy UL and ULC requirements, the communicator can enable link supervision at preset intervals. Once the communicator... -
TG-7: Complete Supervision of Communication Path
The communicator continuously supervises the connection to the alarm panel and the cellular and LAN (when not set in cellular-only... -
XR550 – Encrypted Communication
The XR550 panel can communicate using AES encryption. If you currently have an XR550 panel with network capability, you may...