Fire Alarm

The Wheelock Eluxa weatherproof series EL4XMTST/EL3RMTST Multi-Tone Strobe appliances are designed for easy installation with a pre-wire capable EL4XBB surface...

If networking two or more control panels or network control annunciators, each unit requires a Network Communications Module (NCM) or...

The control panel and modules are installed in a CAB-4 series backbox . There are four different sizes available, holding...

The following two figures illustrate the location of the various connections, switches, jumpers and LEDs on the CPU2-640/CPU2-640E and its...

The NBG-12LX Addressable pull station is a non-coded, dual-action manual pull station with a key-lock reset feature. It provides NOTIFIER...

Figure 4-13 illustrates, in more detail, the programming flow when in the SK-5280 outputs menu. If Zones 1-10 is selected...

Figure 4-11 illustrates, in more detail, the programming flow when in the line options menu.

Table 3-3 shows the maximum battery standby load for the SK-5208 based on 24 and 60 hours of standby. The...

Power-limited and nonpower-limited circuit wiring must remain separated in the cabinet. All power-limited circuit wiring must remain at least 0.25″...

Connectors are provided for Terminal Mode and ACS Mode annunciators as well as a Personal Computer for programming or a...

The MS-9200 provides two Notification Appliance (bell) Circuits configurable for Style Y or Style Z. Each circuit iscapable of 2.5...

The MS-9200 provides a set of Form-C alarm and Form-C trouble contacts rated for 2.0 amps @ 30 VDC (resistive)....

The LCD-40 Series, consisting of the LCD-40 and LCD-40L, are com-pact, attractive, 40-character backlit LCD fire annunciators that arecapable of...

Synchronization is a feature that controls the activation of notification appliances in such a way that all devices will turn...

4 Class A Notification Appliance Circuits, supervised and power-limited.