Alarm Docs
  • Submit Article
  • Contact Us
  • About Us
  1. Home
  2. Honeywell
  3. Tuxedo Touch: Account setup
Searching...

Other Articles

  • DMP XF6: Accessory devices
  • Reset Alula radio/communicator
  • How to add a zone to a VISTA H3
  • DMP XF6: Programming requirements
  • DMP XF6: Compatibility
  • DMP XF6: Wire the panel
  • DMP XF6: Install the panel
  • DMP XF6: Specifications Summary
  • XF6: Operating Instructions
  • Radionics: D168 Module Installation
  • PROA7PLUS: Re-register the radio
  • Install piezo on Honeywell Vista 21
  • S2000 – How to enter programming
  • DMP: Version 263 Update
  • Qolsys IQ4: Latest firmware version
  • Napco GEM-P1632: Error codes
  • Honeywell VISTA-128BPT compatible devices
  • Honeywell Vista 128BPT: ECP Error
  • Updating firmware on an Alula cellular communicator
  • How to update NAPCO StarLink firmware
  • How to adjust thermostat from IQ Panel 5
  • Create a guest code on the Qolsys IQ5
  • Programming VISTA-21iP for internet-only
  • Program user code on DMP XR/XT panel
  • Program the on-board triggers on Vista 21

Tuxedo Touch: Account setup

Local remote login is accessed by entering the IP address in the bottom left had corner on the smart devices web browser, if connected to the same network. The other option is to enter https://tux.mylanconnect.com.

NOTE: If the “Secured Web Server Access (HTTPS)” option is enabled on the Account Setup screen, the address will be https://Tux.MyLanConnect.com. A list of the keypad connected to the same network appear.

Press the IP address to access the Tuxedo’s home screen. Remote Access through an outside network requires port forward configuration on the router. After referring to the router, enter the external IP address: port number that is forwarded to access the Tuxedo’s home screen.

Tagged: accountsetuptuxedo
Was this article helpful?
Yes No
© Copyright 2026 - AlarmDocs.Com