Up to 96 Security Codes (User Numbers) can be added, deleted, and partitioned to the Control Panel either through the keypads, touchscreens, or the AlarmNet 360 programming tool.
There are two Security Codes defaulted in the system which is the Installer Code, user number 01, and is set to 4112; the System Master Code, user number 02, and is set to 1234 in all 4 partitions.
The Master Code can be used to enter additional 4-digit Security Codes via keypads and touchscreens while the system is in the Disarmed state. Security Codes cannot be added or changed while the partition is armed in any mode.