Your system may be set up so that certain lights or other devices can be turned on or off by using the #70 command from either a keypad or a telephone keypad (if 4286 VIP module is used). Ask your installer if this has been done in your system.
To activate relays from a keypad, enter 4-digit security code + # + 70. Follow the keypad prompts described below.
To activate relays using a telephone and 4286 VIP module, first dial the 2- digit phone access code. When the system acknowledges the access, enter 4-digit security code + # +70. The following prompts/voice responses will begin.
