The SD-2000 Security system has the ability to be broken into separate independent sub systems known as partitions. Each user code can be valid in one or more partitions. Normally partition assignments are made by the installer through any of the programming methods during the initial system programming. This command allows authorized end users to modify the partition assignments for users. For example, a plant manager may have reason to create different user codes and change the areas of the plant (partitions) that each specific user can access.
The partition assignment function allows authorized users (level 1 & 2) to change the partition access of the various user codes. Note: A level 1 user will be able to change the partition assignment for users within all partitions, while a level 2 user can only change partition assignments within the partitions that he is permitted to access.
To enter the partition access section enter #7
Enter your four digit user code. Note: The user must have an authorization level of 1 or 2 in order to access this function.
Enter the user number (001 – 128) to be mapped to various partitions.
This display allows assignment or removal of users from each of the 8 partitions. The first line displays the user being modified (displayed as xxx). The second line shows the partitions where the user is currently active. For example, if the keypad shows 1 345 then the user is active in partitions 134 and 5. Entry of the partition number will toggle the state of that partition. If the user is already defined within that partition, entry of the number will remove that user, and vise versa. The display will reflect the current status (the partitions displayed reflect partitions where the user is active). Upon completion press the * key.