Green circle Indicates detector/panel compatibility with all firmware versions
Yellow circle Indicates detector/panel compatibility with firmware version 02.00.011 or higher
Notes on Protocols:
- The ES-50X, ES-50XP, ES-200X, ES-200XP and ES-1000X support SS protocol, LiteSpeed™ protocol or Classic Loop Interface Protocol (CLIP).
- The MS-9200UDLS, MS-9600LS and MS-9600UDLS support LiteSpeed™ protocol or Classic Loop Interface Protocol (CLIP).
- The MS-9200, MS-9600, MS-9200UD, and MS-9050UD support Classic Loop Interface Protocol (CLIP) only.
- LiteSpeed is a communication protocol that greatly enhances the speed of communication between analog intelligent devices. This is the default mode of operation for these FACPs.
- SS is a protocol supported in LiteSpeed mode of operation on ES panels using the firmware version as indicated in the table above. Both SS and LiteSpeed protocol devices can be intermixed in LiteSpeed mode on supported panels.
- CLIP polls devices in sequential order. All Fire-Lite addressable fire alarm control panels can operate in CLIP mode. This is the default mode of operation for all other FACPs.
NOTE: FACPs must be programmed for only LiteSpeed or CLIP mode of operation. Communication protocols cannot be split.
