Alarm Docs
  • Submit Article
  • Contact Us
  • About Us
  1. Home
  2. Honeywell
  3. Tuxedo Touch: Account setup
Searching...

Tuxedo Touch: Account setup

Local remote login is accessed by entering the IP address in the bottom left had corner on the smart devices web browser, if connected to the same network. The other option is to enter https://tux.mylanconnect.com.

NOTE: If the “Secured Web Server Access (HTTPS)” option is enabled on the Account Setup screen, the address will be https://Tux.MyLanConnect.com. A list of the keypad connected to the same network appear.

Press the IP address to access the Tuxedo’s home screen. Remote Access through an outside network requires port forward configuration on the router. After referring to the router, enter the external IP address: port number that is forwarded to access the Tuxedo’s home screen.

Tagged: accountsetuptuxedo
Was this article helpful?
Yes No

Other Articles

  • Qolsys IQ Panel 5: How to change the battery
  • What is IQ5 Hub
  • Fire-Lite MS-5210UD: System Supervisory Restoral Response
  • Fire-Lite MS-5210UD: System Supervisory Condition Response
  • Understand Brivo ACS100 product compatibility
  • Understand the function of the Brivo ACS100-E control panel
  • Verify connection of the LAN to the Brivo ACS100
  • Resetting the Brivo ACS100 to factory default
  • MS-5210UD: Optional modules
  • Ademco 5817CBXT: Installation Instructions
  • Honeywell 5817CBXT: Product summary
  • What is Vista 128 Polling Loop (V-PLEX)
  • DMP XF6: Accessory devices
  • Reset Alula radio/communicator
  • How to add a zone to a VISTA H3
  • DMP XF6: Programming requirements
  • DMP XF6: Compatibility
  • DMP XF6: Wire the panel
  • DMP XF6: Install the panel
  • DMP XF6: Specifications Summary
  • XF6: Operating Instructions
  • Radionics: D168 Module Installation
  • PROA7PLUS: Re-register the radio
  • Install piezo on Honeywell Vista 21
  • S2000 – How to enter programming
© Copyright 2026 - AlarmDocs.Com