Each user of the system can be assigned a level of authority, which authorizes the user for certain system functions. A user can have different levels of authority within different partitions. Use the “View Capabilities” keypad function (User Code + [✳] + [✳]) to view the partitions and authority levels…
User Code Commands Add A User Code = User Code + 8 + New User Number + New User’s CodeChange a Code = User Code + 8 + User Number + New User’s CodeDelete a User Code = Master Code + 8 + User Number to Be Deleted + Master…
Your two-line display keypads provide one‑button shortcut keys. Holding down a keypad button for two seconds until the tone sounds allows you to arm, monitor, or reset your system. These options can still be accessed through the User Menu if desired. Press Key 1: Arm Away for Home/Sleep/Away systems Arm…
Area Assignment: Your security system is divided into two separate areas. Motion detectors, inside doors, and other interior protection devices are assigned to the Interior area while windows and exterior doors are assigned to the Perimeter area. Perimeter or All: When arming an All/Perimeter system, the keypad displays PERIM ALL. If…
Telco 1 is used for the Fire Panel to output contact ID messages to the HWF2-COM, and Telco 2 is used by the HWF2-COM to report faults to the Fire Panel. If Telco 1 is not operational, the Fire Panel will use Telco 2 to report events if there are…
LED Indicator STATUS AC (green) AC power available. ACTIVE (green) Cyclical flashing – normal communications.Repetition of 3 flashes – loss of communications. LOW BATT (yellow) Missing or low battery. TROUBLE (yellow) One or more trouble conditions exist, such as; overload, output supervision, ground fault, or charger failure. Notes
Local remote login is accessed by entering the IP address in the bottom left had corner on the smart devices web browser, if connected to the same network. The other option is to enter https://tux.mylanconnect.com. NOTE: If the “Secured Web Server Access (HTTPS)” option is enabled on the Account Setup…