DXR-702: Programming memory

1. PRESS AND RELEASE PROGRAM BUTTON FOR THE DESIRED CHANNEL.

2. PROGRAM INDICATOR WILL LIGHT FOR 3 SECONDS IF THERE IS ROOM IN THAT CHANNEL’S MEMORY FOR ANOTHER TRANSMITTER (32 TRANSMITTERS MAXIMUM TOTAL ALLOWED BETWEEN BOTH CHANNELS IN THE RECEIVER).

3. WITHIN 3 SECONDS, SEND SIGNAL FROM TRANSMITTER, PROGRAM INDICATOR WILL FLICKER AS SIGNAL IS RECEIVED.

4. REPEAT THE ABOVE THREE STEPS FOR EACH ADDITIONAL TRANSMITTER.

AFTER PUSHING THE RECEIVER’S PROGRAMMING BUTTON, YOU ONLY HAVE 3 SECONDS TO SEND A SIGNAL BEFORE PROGRAMMING MODE STOPS.

MULTI-CHANNEL TRANSMITTER NOTE:

EACH RECEIVER CHANNEL CAN ONLY BE PROGRAMMED TO ACTIVATE FROM A SINGLE BUTTON ON A MULTI CHANNEL TRANSMITTER. LEARNING THE SAME BUTTON INTO BOTH CHANNELS ACTIVATES CHANNEL ONE ONLY.