Searching...

DMP: System Wi-Fi Setup

Use this function if your system is connected through Wi-Fi.

Use WPS to Connect Your System

  • 1. Press CMD until MENU? NO YES displays.
  • 2. Select YES.
  • 3. Enter your user code and press CMD.
  • 4. Press CMD until WIFI SETUP? displays.
  • 5. Press any select key or area and the keypad displays WPS LIST MANUAL.
  • 6. Press the WPS button on your Wi-Fi router.
  • 7. Select WPS on your keypad and SEARCHING displays.
  • 8. When WPS is successful, CONNECTED displays on your keypad. If WPS was not successful, WPS FAILED RETRY? NO YES displays.
  • 9. Press YES to retry. Press NO and WPS LIST MANUAL displays.

List the Available Networks

  • 1. Press CMD until MENU? NO YES displays.
  • 2. Select YES.
  • 3. Enter your user code and press CMD.
  • 4. Press CMD until WIFI SETUP? displays.
  • 5. Press any select key or area and the keypad displays WPS LIST MANUAL.
  • 6. Select LIST and SEARCHING displays.
  • 7. Press CMD to view the available Wi-Fi networks.
  • 8. When the desired network displays, press any select key or area to connect. W/L KEY:**************** displays.
  • 9. If the system is unable to detect the security type, press any select key or area on the keypad and WEP WPA NONE displays. Select the desired security type and enter your network password.

Manually Connect Your System

  • 1. Press CMD until MENU? NO YES displays.
  • 2. Select YES.
  • 3. Enter your user code and press CMD.
  • 4. Press CMD until WIFI SETUP? displays.
  • 5. Press any select key or area and the keypad displays WPS LIST MANUAL.
  • 6. Select MANUAL.
  • 7. Enter the name of your Wi-Fi network and press CMD. W/L KEY:**************** displays.
  • 8. If the system is unable to detect the security type, press any select key or area on the keypad and WEP WPA NONE display. Select the desired security type then enter your network password.

Test the Network Connection

  • 1. Press CMD until MENU? NO YES displays.
  • 2. Select YES.
  • 3. Enter your user code and press CMD.
  • 4. Press CMD until WIFI SETUP? displays.
  • 5. Press any select key or area and the keypad displays WPS LIST MANUAL. Press CMD to display TEST.
  • 6. Select TEST. When the test is successful, CONNECTED displays. If the test is unsuccessful, NOT CONNECTED displays.

Tagged:
Was this article helpful?
Yes No