• SD-2000: Chime Mode

    The system contains an optional chime feature which causes the keypad sounder to activate for one second every time selected zones such as an entrance door is opened while the system is disarmed. For example, this could be used to inform the end user each time a selected opening such…

  • SD-2000: Exception Menu

    EXCEPTION MENU [# 3] This command allows the end user to access the schedules, holidays and system time information. This requires the following keystrokes: #3 [USER]. After entering # 3 and a user code the following menu will appear: The commands and required authorization levels are shown below:

  • SD-2000: Quick Bypass

    QUICK BYPASSING [# 5] Bypassing can also be performed without entry of a user code through entry of # 5 followed by the three digit zone number. For example to bypass zone 13 enter #5 013.

  • SD-2000: Zone Directory

    ZONE DIRECTORY [# 4] The LCD keypad can display descriptors of the zones connected to the system. To view the zone descriptors for your system, simply press # 4 and the system will scroll the descriptors on the keypad. This command will display the descriptors for the zones associated with…

  • SD-2000: Quick & Forced Arming

    QUICK ARMING [# 1] Depression of the # key followed by the digit 1 will ARM the system without entry of a user code. This is known as QUICK ARMING and will arm the system in the AWAY mode. This is identical to the ARMING command previously described. NOTE: System…

  • SD-2000: Programming Questions Overview

    The LCD keypad programming questions have been organized into the following functional categories: CENTRAL STATION COMMUNICATIONS [Questions 001 – 022]This area defines the telephone numbers and dialing options for the control panel to communicate with a Central Station and the remote programming devices. USER DEFINITION [Questions 023 – 028]Defines the…

  • SD-2000: Question Selection Modes

    The keypad programming questions can be obtained either sequentially or directly as follows: SEQUENTIAL METHOD A fast method to scroll through the sequence of programming questions involves the successive use of the NEXT QUESTION (or STAY ) key. This will advance forward through the programming questions in sequential order without…

  • SD-2000: User Deletion

    Removal of users from the panel can be performed as follows: CODE – USER – USER NUMBER – # [User #] Represents the user number being deleted (001 – 128). User deletion can only be performed by a level 1, 2, or 3 user code. The deletion procedure should be…

  • ADC-T40K-HD: Installation Manual

    The Smart Thermostat HD requires 24 VAC power. There is no option for a battery-powered mode. Power is supplied via a common wire, typically identified as C. Preparation Test the existing system Verify that the heating and/or cooling system is operating properly before you try to install the new Smart…

  • SD-2000: User Programming

    Users can be programmed through the keypad in addition to the external programming devices. Keypad programming allows authorized users to change user access codes and authorization levels. Users within the SD-2000 control panel have the following characteristics: USER PROGRAMMING PROCEDURE LCD KEYPAD