Connectors are provided for Terminal Mode and ACS Mode annunciators as well as a Personal Computer for programming or a printer for hardcopy printouts of system information. Note that the TB7 Out and In polarities are used for connection to a Terminal Mode annunciator. Refer to page 35 for information…
The MS-9200 provides two Notification Appliance (bell) Circuits configurable for Style Y or Style Z. Each circuit iscapable of 2.5 amps of current. Total current drawn from these as well as other DC power outputs cannot exceed 6.0amps. Use UL listed 24 volt notification appliances only. Circuits are supervised and…
The MS-9200 provides a set of Form-C alarm and Form-C trouble contacts rated for 2.0 amps @ 30 VDC (resistive). The panel also provides a Form-A supervisory contact rated for 2.0 amps @ 30 VDC (resistive).
The LCD-40 Series, consisting of the LCD-40 and LCD-40L, are com-pact, attractive, 40-character backlit LCD fire annunciators that arecapable of displaying English-language text. They mimic the display onthe MS-9200 main control circuit board and will annunciate devicetype, point alarm, trouble or supervisory condition, zone assignmentplus any custom alpha labels programmed…
The minimum required system for SIA CP-01 is a VISTA-128BPTSIA Control, one of the following keypad models; 6160, TUXS, TUXW, 6280S, or 6280W and a UL Listed Bell. Programming at installation may be subordinate to other UL requirements for the intended application. Combined Entry Delay and Abort Window should not…
Your system may be set up such that a locked access door (such as in a lobby) can be unlocked momentarily or for a specific period of time, using a keypad command. Ask your installer if this has been done in our system.
Your system can be set to alert you to the opening of a door or window while it is disarmed by using CHIME mode. When activated, three tones will sound at the Keypad whenever a protected perimeter door or window is opened, and the Not Ready message will be displayed….
Your system may be equipped with a keyswitch for use when arming and disarming a partition. A red and green light on the keyswitch plate indicate the status of your system as follows:
The Quick Exit feature allows you to exit the armed partition without having to disarm and then rearm the partition. Using the # + 9 Keys
Using the 6 BYPASS Key This key is used when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. All bypasses are removed when an OFF sequence (security code…