You can add up to 242 users to your system, each with a custom name and access level you allow. Notifications By creating individual users, you can set up custom text notifications when they access or use your system, keeping you connected no matter where you are. How to Add…
Wireless Zones – GC2e & GC3e eSensor Equipment Codes When programming eSensors (Wireless Sensors & Keyfobs) the equipment code must match the sensor being installed.
Removing a zone from a 2GIG security system is a standard maintenance task, typically performed when a sensor has failed, a door or window has been permanently sealed, or you are reorganizing your system’s layout. Because 2GIG has released several distinct panel generations over the years—ranging from the original GC2…
The 1128 Wireless Glassbreak Detector is a fully-supervised, low current shock and glassbreak sensor that provides detection coverage up to 20 ft from framed glass mounted in an outside wall. You can mount the 1128 on the ceiling or on an opposing wall for maximum flexibility and coverage. The 1128…
The IQ4 v4.3.0 and higher version panels have a feature that can display the ambient temperatures detected by PowerG devices. This feature allows the client to review a list of PowerG devices and see the ambient temperature readings from these devices. To enable the option, go to : Settings >Advanced…
The IntelliSense® IS-310 is a Request-to-Exit Passive Infrared (PIR) sensor. Mounted near an exterior door inside a building with an access control system, the sensor provides free exit to individuals within the building without causing an alarm. The parts of the IS-310 are shown below. Mounting Location The IS-310 can…
The HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the switch. When activated, the switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed)…
There are seven steps in installing Telguard properly. IF YOU DO NOT PROCEED IN THE ORDER AND MANNER PRESCRIBED, YOU MAY NOT COMPLETE THE INSTALLATION IN THE TIME ALLOCATED. STEP 1: REGISTER FOR CELLULAR SERVICE Register the unit online through www.telguardonline.com, by completing the Online Registration Form at www.Telguard.com. Telguard requires this information to…
The DMP Model 7060, 7063, 7070, and 7073 Thinline™ LCD Keypads offer the same flexible features and functionality as current DMP keypads in a stylish, sleek new design. Each keypad provides four 2-button Panic keys, AC power LED, Armed LED, 32-character display, backlit logo and keyboard with easy-to-read lettering and…
The 1142INT is a wireless two‑button hold-up transmitter designed for installation under the counter. The 1142INT features 128‑bit AES encryption. The 1142INT unit provides two buttons that, when pressed at the same time, send a panic message to the control panel. The buttons also provide an LED that can be…