Your system may use wireless transmitters to send alarm and trouble information from the protection devices to the panel. Wireless systems have a few unique keypad displays. Special Keypad Displays As you use your system, you occasionally see a keypad display that asks you to enter a code or that…
This Quick Start Guide is intended for experienced installing technicians. It is a basic reference to ensure all connections are properly made. Models include ACSR35L, ACSR62L, and ACSR64L long-range readers. Introduction A key component of a physical security electronic access control system, a mobile-ready reader combining BLE and contactless smart…
Note: Remove all power from the system while connecting modules to the corbus. Note: All circuits are power limited. GND is not used. After the wiring is completed, reconnect the power to the security system. Enroll the module, then program the wireless devices. Tamper The HSM2164RF has separate built-in wall…
The HSM2164RF v1.0 features two LEDs to help with the installation of devices and troubleshoot the operation of the unit. In normal operation, the LEDs indicates if the signal received is from an enrolled device. Alternatively, when the panel is in placement test mode, the green LED flashes for the…
The first time that the control panel is downloaded (whether initiated at the jobsite or remotely), a secret code is loaded in by a Service Terminal. Future upload or download requests cause verification of the secret code by the control panel before processing of data is allowed. If the secret…
Drift compensation uses software algorithms that identify and compensate for long-term changes in the data readings from each address- able smoke detector. These long-term changes in detector data readings are typically caused by dirt and dust accumulation inside the smoke chamber. Drift compensation performs the following functions: The FACP software…
4.22: Walktest is a feature which allows one person to test the fire alarm system. An audible walktest will momentarily sound the Notification Appliance Circuits in the building and store the walktest information in a file at the panel. A silent walktest will not sound the NACs but will store…
4.21.6: The control module delay feature, if enabled, will delay activation of a control module after a programmed time of 1-180 seconds after being triggered by an alarm condition. This feature requires the approval of the local Authority Having Jurisdiction. Refer to the table on page 48 for permissible settings.
The IQ Panel allows for up to 4 partitions to be programmed. Partitions allows for the creation of zone groups in a home or building so that users can arm some sections of the property while leaving other areas disarmed. Partitioning enables greater personalization and functionality while simplifying installation. Each…
Make sure you are always connected to your home Wi-Fi network and that your software is up to date. You can also manage your Bluetooth connected devices directly from this screen.