The first code programmed should replace the default (Level-3) code, “U01 123 • • • – • • – • • ”, (1,2,3), which should not be selected as a user code. Enter up to six digits (a minimum of four digits is recommended). The related Option Code and Authority…
To factory reset a Qolsys IQ Panel 4, go to Settings, Advanced Settings, enter the Dealer Code (default 2222), then navigate to Installation > Dealer Settings and select Master Reset. Confirm the action when prompted, and the panel will reset to its factory default settings and restart. Step-by-step instructions: Important Considerations:
To change a user code on a Napco panel, you generally need the master code and access to the keypad. Enter the master code, then navigate through the programming menu by pressing the function and bypass keys until you reach the user code menu, where you can select the user slot…
Output Devices The system supports up to 16 relays and/or Powerline Carrier devices (X-10 devices) plus 2 built-in trigger outputs in any combination. These 18 “outputs” are assigned to system-wide output numbers (01-18). Use *79 Menu Mode to assign output numbers and map them to device addresses. Output Functions The…
The 714N-POE Network Zone Expander Module allow you to add 4 zones to XR150/XR550 Series panels using IP network capability. The 714N-POE is compatible with 1k to 10k resistors, giving a wide variety of options for takeovers. Power Supply 714N-POE module operates at 12 VDC from a power supply. The…
XT Series Control Panels Align the 263LTE standoff hole with the standoff already placed in the panel and snap it into place. XR and XF6 Series Control Panels CONNECT THE ANTENNA XT Series Control Panels XR and XF6 Series Control Panels ACTIVATE THE 263LTE Before power is reapplied to the…
1. Make sure your system is disarmed2. Type in your master code on your keypad3. Press the number “8”4. Type in a two digit user number that you’re assigning to the code* Remember: “01” is the installer code and “02” is the master code. Pick an available sub user code…
Via-30PSE and Vista-10SE Visa-10P, Vista-15P, Vista-20P and Vista-21iP
The current battery level of a video doorbell can be viewed as a percentage using the Alarm.com app or Alarm.com customer website. To view the battery level of a video doorbell: ADC-VDB780B battery level indicators In app versions 5.3+, users are now informed if their ADC-VDB780B battery has any active issues…
Updating your password for the Alarm.com app and Alarm.com customer website helps keep your system secure. The password can be changed while logged into the account. If you are unable to log in to your account, the password can be reset. Change the password