Although the communicator has the capability for an automatic periodic self-test, a separate feature is provided for determining the current operational status of every Telguard communicator. This feature is called Check Status and is used to provide real-time operational status for the communicator on-demand. It is useful in resolving STC…
The automatic self-test signal schedule is programmable as prescribed when the communicator is registered. The Central Station receives the automatic self-test report in the same format that the alarm panel normally uses for communication over the Telco line. The self-test code and testing frequency are set during registration and can…
The communicator can supervise and report status of the backup battery and AC power source when powered from the AC adapter. It has an integrated control and power component which keeps the communicator’s battery charged and is also supervised. Furthermore, the communicator can report on low voltage events when powered…
In order to satisfy UL and ULC requirements, the communicator can enable link supervision at preset intervals. Once the communicator is provisioned with the Link Supervision option, the TCC constantly monitors all the enabled communicator pathways and sends a specific message to the Central Station if a path is broken…
The communicator continuously supervises the connection to the alarm panel and the cellular and LAN (when not set in cellular-only mode) pathways. If any of these pathways becomes inoperative, the communicator can generate a relay trip output that can be connected to a zone input of the host alarm panel….
The Telguard TG-7 Dual Path Series communicator supports multiple alarm communication formats. Auto Format Detect feature allows the communicator to adapt to receive any listed format. If the alarm panel’s format is changed for any reason, the communicator will adjust to accept the new format.
The TG-7 Dual Path Series is comprised of transmission devices that are installed at protected premises to provide signal transmission over cellular and Internet-enabled LAN connections for alarm systems. The communicator transmits alarm signals over the nationwide digital cellular network if the premises Internet connection has been disrupted or compromised,…
The UL Listed equipment at the TCC plays a key role in the operation of every Telguard device. All Telguard units utilize the TCC due to the panel alarm signal format encoding and decoding requirements used in packet-data transmissions. The TCC also manages the real-time databases for Telguard accounts and…
For best results, we recommend bringing the Z-Wave controller into the area where the Smart Water Valve+Meter is installed.
The Flow LED is blinking The Flow LED is used to indicate a system hardware failure or other operation that may impact the performance of the Smart Water Valve+Meter. The number of blinks and blink patterns can be used to diagnose the failure or operation. The Smart Water Valve+Meter is…