• DXR-702: Programming memory

    • November 19, 2025
    • The Master

    MULTI-CHANNEL TRANSMITTER NOTE: EACH RECEIVER CHANNEL CAN ONLY BE PROGRAMMED TO ACTIVATE FROM A SINGLE BUTTON ON A MULTI CHANNEL TRANSMITTER. LEARNING THE SAME BUTTON INTO BOTH CHANNELS ACTIVATES CHANNEL ONE ONLY.

  • 7073 Zone 2 Door Contact with Soft-Shunt

    • November 16, 2025
    • The Master

    If the door being released by the keypad is protected, you can provide a programmed shunt time by connecting its contact to Zone 2 (White/Red pair) on the keypad and enabling the Soft-Shunt feature. See ZONE 2 SHUNT later in this document. Door contacts may be N/C or N/O. Note:…

  • 7073 Door Strike Relay Operation

    • The Master

    As soon as the user code sent from the reader is verified by the panel, the keypad door strike relay activates for 5 seconds. During this time, the access door connected to Zone 2 must be opened to start the programmed entry/exit timer and zone Soft-Shunt. Note: The 5-second door…

  • 1148-G: Installation Guide

    • The Master

    The 1148 Personal Pendant is a one-button, wireless emergency transmitter designed to be worn as a wristband or on a break-away lanyard. The 1148 may be used to activate an event at the receiver. The 1148 features a permanently sealed, water-resistant design and includes a Status LED to provide visual…

  • Vista 128/250: Installing External Sounders

    • The Master

    The VISTA-128BPT/VISTA-250BPT provides a bell circuit output for operating fire and burglary alarm notification appliances. The alarm output is rated as follows: 10VDC – 14VDC, 1.7A max., power-limited. Compatible Alarm Indicating Devices Supervising the Alarm Output To wire the alarm output using the supervision feature, perform the following steps:

  • DMP: User Profiles (Info)

    • The Master

    Add, delete, or change User Profiles, that define the authority of each user code in the system. Several characteristics define the authority of each User Profile within the system. Make sure that at least one administrator in your system has a profile with all authorities and all areas. Up to…

  • DMP: Transfer Controller (XFER)

    • The Master

    This option allows the transfer of all existing Z-Wave devices that are currently programmed in another manufacturer’s Z-Wave portable controller to your system. Initiate the transfer at the other manufacturer’s Z-Wave portable controller after starting the transfer on the DMP keypad. Z-Wave devices are NOT overwritten until the transfer has…

  • DMP: Add Z-Wave Devices

    • The Master

    This option allows you to ADD a Z-Wave device to your system. Once added, a Z-Wave device may be assigned to a Favorite.

Prev Next