2GIG: eSeries equipment codes
Wireless Zones – GC2e & GC3e eSensor Equipment Codes When programming eSensors (Wireless Sensors & Keyfobs) the equipment code must...
- Home
- 2GIG
2GIG
2GIG: Deleting sensor
Removing a zone from a 2GIG security system is a standard maintenance task, typically performed when a sensor has failed,...2GIG: How to update firmware
Maintaining the firmware on your 2GIG security panel is a critical task for ensuring the longevity, security, and feature compatibility...2GIG: Arm stay with no delay
Adjusting your 2GIG security system—whether it is the classic GC2, the advanced GC3, or the modern Edge—to arm in “Stay”...2GIG: How to connect to Wi-Fi
Connecting your 2GIG alarm panel to a Wi-Fi network is a common and excellent way to establish a dual-path communication...2GIG: Add a Z-Wave device
To add a Z-Wave device to your 2GIG control panel, you will first need to clear any existing network data...2GIG: Remove a Z-Wave device
To remove a Z-Wave device from your 2GIG panel, you must put the panel into exclusion mode and then activate...2GIG: Check the cellular connection
To check the cellular connection on your 2GIG control panel, you need to run a cellular test from the panel’s...2GIG GC3: How to add sensor
To add a wireless sensor to your 2GIG GC3 panel, you need to enter the system’s programming menu, select an...2GIG: How to change the time
To change the time on a 2GIG control panel, you will need to use the touchscreen interface to access the...