The following is a list of Function Key options available: [00] – Null KeyThe key is not used and will perform no function when pressed. [01] – Select Partition 1Provides an easy way to select Partition 1 operation from a Partition 2 keypad. This is the same as pressing and…
Quick Arm If the Quick Arm Enable option is enabled the panel can be armed by entering [✱][0]. This is a useful method of arming a Partition when someone without a User Code will be required to arm a Partition. Quick Exit Quick Exit will allow someone to leave an…
This keypad command can be used to program several different functions. The following are the items programmable: [1] – Time and Date [4] – System Test [6] – User Initiated Call-Up[2] – Auto-Arm Enable * [5] – Enable DLS (Downloading) [7] – For future use[3] – Auto-Arm Time * Auto-Arm…
If enabled the keypad will beep 5 times rapidly when a zone is tripped and restored. The panel will only do this for zones with the Door Chime attribute enabled and if the door chime feature is enabled. To turn Door Chime on/off:
Auto Bypass When the system is armed and any zone or zone(s) on the system have been programmed as Stay/Away the panel will immediately turn on the ‘Bypass’ light. It will then monitor all zones programmed as Delay 1 and Delay 2. If no delay type zone is violated by…
The system cannot be armed unless the ‘Ready’ light is on. If the ‘Ready’ light is not on make sure all protected doors and windows are secure and stop movement in areas covered by motion detectors. When the ‘Ready’ light is on enter any valid Access Code. As each digit…
By default the Partition Master Codes are not programmed. They must be programmed by the System Master Code. A Partition Master Code, when first programmed, can act as a second master code and have the same access as the System Master Code. To program a Partition Master Code to operate…
The System Master Code can be used to lock in the code. This will prevent the userfrom being able to change the System Master Code. If they attempt to change the code the keypad will sound a long error beep. The System Master Code can be used to arm or…
To clean the Qolsys IQ Panel 4 screen, first activate the “Clean Screen” mode by swiping down from the top of the screen to access the settings tray and tapping the Clean Screen icon, which disables the touch response for 30 seconds. Then, use a soft, lint-free cloth to wipe…
To connect your Qolsys IQ4 Panel to Wi-Fi, swipe down from the time display to open the drop-down menu, tap Settings, then Advanced Settings. After entering your Installer Code (default 1111), select Wi-Fi, enable it if necessary, and choose your network. Enter the network password, then tap Connect to establish…