• XR 500 – Wiring Diagram

    • September 27, 2025
    • The Master

    The XR500 Series diagram below shows some of the accessory modules you can connect for use in various applications.

  • XR 500 – Encrypted Communication

    • September 26, 2025
    • The Master

    An XR500E panel communicates using AES encryption. If you currently have an XR500N panel installed, you may contact DMP Customer Service with the panel serial number. The serial number(s) should be sent in writing via e-mail or fax. A separate feature key is sent for each panel to activate encrypted…

  • XR 500 – Central Station Communication

    • The Master

    You can program the XR500 Series panel for reporting to DMP SCS-1R or SCS-VR Receivers using digital dialer, cellular, network, or Contact ID communication. The XR500 Series connects at the premises to a standard RJ31X or RJ38X telephone jack. Use the DMP 893A Dual Phone Line Module when connecting the…

  • XR 500 – Output Expansion

    • The Master

    In addition to the two SPDT relays and four programmable open collector outputs on the XR500 Series, you can also connect up to 25 programmable Model 716 Output Expansion Modules to each LX-Bus. These modules can provide an additional 500 programmable SPDT relays. The XR500 Series provides 100 Output Schedules…

  • XR 500 – Zone Expansion

    • The Master

    Up to 574 additional zones are available on the XR500 Series using DMP LCD keypad remote zone capability and zone expansion modules. The panel keypad data bus supports up to sixteen supervised device addresses with each address supporting up to four programmable expansion zones. Up to 500 zones are available…

  • XR 500 – Description

    • The Master

    The DMP XR500 Series panel is a versatile 12 Vdc, combined access control, burglary, and fire communicator panel with battery backup. The XR500 Series provides eight on-board burglary zones and two on-board 12 Vdc Class B powered zones. The powered zones have a reset capability to provide for 2-wire smoke…

Prev